Recommended Posts
Hi. I was just updating to 2022.06 build 28 and at the end of the installation process I got this error message. I opened a project and it seems ok but want to check if the install went ok or not with this message coming up. At least it’s cheap at only $0. Thanks for any suggestions !
Share this post
Link to post
Share on other sites
TREESHA… you’re NOT the only one!!1
Many, too many of us have got that error ++ others that are appearing lately with Cakewalk SONAR by Bandlab.
(Maybe is the price to pay for «FREE» something that used to cost money… I for one, PAID FOR IT and now I’ve had to go back to Cubase, MOTU… )
The Customer support is only via email of course and is DREADFUL!!
Answers to problems to a Computer technician and Music & Technology MBA such as… Reboot the PC… Check your Firewall…
Pls, GET SONAR Platinum back and CHARGE for it so we can complain and get answers.
Bandlab… You have made a complete MESS of a decent program with EXCELLENT Client Support.
-
2
Share this post
Link to post
Share on other sites
9 hours ago, tam said:
TREESHA… you’re NOT the only one!!1
Many, too many of us have got that error ++ others that are appearing lately with Cakewalk SONAR by Bandlab.
(Maybe is the price to pay for «FREE» something that used to cost money… I for one, PAID FOR IT and now I’ve had to go back to Cubase, MOTU… )
The Customer support is only via email of course and is DREADFUL!!
Answers to problems to a Computer technician and Music & Technology MBA such as… Reboot the PC… Check your Firewall…Pls, GET SONAR Platinum back and CHARGE for it so we can complain and get answers.
Bandlab… You have made a complete MESS of a decent program with EXCELLENT Client Support.
…….. and you have of course done something as simple as reading the other thread called :
Cakewalk Activation Error (20)
you being in IT and having an MBA ? That might help you plus you should dial down the anger a little.
All the best,
J
Edited July 10, 2022 by Jeremy Oakes
Share this post
Link to post
Share on other sites
3 hours ago, Jeremy Oakes said:
. . . Cakewalk Activation Error (20) . . .
I haven’t gotten this error myself (possibly because I don’t seem to use plug-ins that remove files Cakewalk needs), but thanks for mentioning the other thread in case I do run into this situation. I often tend to forget posts that I have no experience with.
Even though tam’s diatribe was overwhelmingly way too over the top for me, I suppose tam merits credit for an assist here.
Peace!
Share this post
Link to post
Share on other sites
I haven’t received any feedback on my specific internal error message so I rolled back and all is well. I haven’t tried updating again but will at some point.
Edited July 10, 2022 by treesha
Share this post
Link to post
Share on other sites
You can Update now if you wish…
They solved the issue in the update, (after almost TWO months!!)
-
1
Share this post
Link to post
Share on other sites
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now
Windows 10: Internal error: CallSpawnServer: Unexpected response: $0
Discus and support Internal error: CallSpawnServer: Unexpected response: $0 in Windows 10 BSOD Crashes and Debugging to solve the problem; Foxit PDF reader started to auto-close itself after a few seconds. So I uninstalled the application, reinstalled and got this error:
Internal error:…
Discussion in ‘Windows 10 BSOD Crashes and Debugging’ started by [_Patrick_], Jan 8, 2021.
-
Internal error: CallSpawnServer: Unexpected response: $0
Foxit PDF reader started to auto-close itself after a few seconds. So I uninstalled the application, reinstalled and got this error:
Internal error: CallSpawnServer: Unexpected response: $0
The program did install, but still auto-closes itself.
I uninstalled, installed Javelin PDF reader, got the same error at the end of the installation, and have the same problem after opening the application.
I’ve tried another .NET application, same issue. Non .NET applications don’t seem to be affected. After the last one I checked the Event Viewer and there’s nothing new.
I’ve tried one of my own .NET C# applications, and it also closes itself. MS Visual Studio closes itself as well.
-
Error message
Can someone explain this error message:
internal error: CallSpawnServer: Unexpected response: $0
I was installing an app called iVCam from e2eSoft
-
Unexpected Store Exception
Hi,
Many factors can be involved with the Unexpected Store Exception
blue screen error such as a conflict with some third-party software, a faulty RAM, or a hardware failure. To rectify such issue, we’d like to ask a few questions:- Were there any changes made on your computer settings prior to this issue?
- Does your computer have the most recent update for Windows 10?
Meanwhile, we suggest that you follow the series of steps in this
article which lists some troubleshooting instructions suitable for blue screen errors.We look forward to your response.
-
Internal error: CallSpawnServer: Unexpected response: $0
Unexpected Store Exception
Hi Peter,
The stop error «Unexpected Store Exception» that you encountered can be caused by a corrupted cache of the Windows Store, system files that got corrupted, a third-party anti-virus software causing a conflict or other system settings that may cause a conflict
to name a few. For us to resolve your concern, kindly answer the questions below:- What troubleshooting steps have you attempted and what were the results?
- What is the complete stop error that you saw when the blue screen error occurred? If possible, kindly post a screenshot.
- Were there any specific activities that trigger the blue screen with a stop code to appear?
- Have you already tried to temporarily disable the third party anti-virus software and check if that resolves the issue?
- Which version and build of Windows 10 is installed on your device?
As an initial recommendation, we suggest that you follow the steps on this
link to complete the guided walk-through to correct issues that may lead to a blue screen error with a stop code.We look forward to your response to our queries.
Internal error: CallSpawnServer: Unexpected response: $0
-
Internal error: CallSpawnServer: Unexpected response: $0 — Similar Threads — Internal error CallSpawnServer
-
Unexpected error
in Windows 10 Software and Apps
Unexpected error: I reinstalled my audio driver because my new headphones is not working but it’s giving me an error saying plug and play is not avaialble. I restarted but nothing works.https://answers.microsoft.com/en-us/windows/forum/all/unexpected-error/cf5d112f-b37e-46c6-980a-935a8ad0dec1
-
Unexpected error
in Windows 10 Drivers and Hardware
Unexpected error: I reinstalled my audio driver because my new headphones is not working but it’s giving me an error saying plug and play is not avaialble. I restarted but nothing works.https://answers.microsoft.com/en-us/windows/forum/all/unexpected-error/cf5d112f-b37e-46c6-980a-935a8ad0dec1
-
Unexpected error
in Windows 10 Drivers and Hardware
Unexpected error: I uninstalled my audio driver because my new headphones is not working. I reinstalled my driver but it’s giving me unexpected error saying plug and play is not available in the machine. I restarted many times but nothing works. Please help… -
Internal HDD-0 is locked by a password?
in Windows 10 Installation and Upgrade
Internal HDD-0 is locked by a password?: So I plugged in my line in aux cable from my guitar amp into my laptop and it froze, the screen went black, but the backlight was on and I could still hear stuff in the background. So I decided to shutdown my computer by holding the power button fora set amount of time, I am… -
UNEXPECTED ERROR
in Windows 10 Ask Insider
UNEXPECTED ERROR: [ATTACH] submitted by /u/Saokaaay
[link] [comments]https://www.reddit.com/r/Windows10/comments/gtm3aq/unexpected_error/
-
Error: There is a problem with a device connected to your pc. An unexpected I/0 error has…
in Windows 10 BSOD Crashes and Debugging
Error: There is a problem with a device connected to your pc. An unexpected I/0 error has…: for two months my laptop screen has blue screen and on screen it was written that an autoatic repair needed,Then there are two options: 1restart the pc 2 press F8 for start -up settings. but after the restart there is same problem saying «There is a problem with a device… -
Bootrec commands giving unexpected responses
in Windows 10 Installation and Upgrade
Bootrec commands giving unexpected responses: After a fresh install of Windows 10 on my Acer Swift, I tried running the command: bootrec /scanos.This command however is showing 0 total Windows Installations. Windows boots and BIOS Settings appear normal. The computer can run updates and is currently up-to-date.
This…
-
Srttrial.txt 0×0 error
in Windows 10 Ask Insider
Srttrial.txt 0×0 error: When i go advanced settings and repair windows from loadind i get this error..and when i open the file it says hdd errors 0×0 long page..how i fix that?i tried to put every command in cmd doesnt help..and tried many youtube guides ..i thought the prob was on hdd so i bought… -
Unexpected error
in Windows 10 BSOD Crashes and Debugging
Unexpected error: I get the above error message when I try to access a Dailywire news feed. Just started happening in the past couple of days.https://answers.microsoft.com/en-us/windows/forum/all/unexpected-error/52dd6a5e-d31a-45ab-b94a-5b0cf62be230
Users found this page by searching for:
-
internal error queryspawnserver unexpected response $0
,
-
внуьтренняя error callspawnserver unexpected response $0
I’m trying to install git for android studio after installation it shows this type of error internal error: CallspawnServer: Uexpected respose: $0
even after i installed latest version of both android studio 4.1.3 and git 2.31.1
whenever i’m trying to open adroid studio it gives me notification of cannot run git, git is not installed
while using adroid studio it redirect me again and again to installation window of git.
guys please suggest me i’m working on important project.
asked Apr 24, 2021 at 19:14
Change the SSH executable to your own native one:
AndroidStudio -> Preferences -> Git -> SSH Executable and changed from Native to Built-in
answered Apr 25, 2021 at 2:05
I solved this problem by changing SSH executable and uninstall the previous git version and reinstall it and finally it works.
First of all you can uninstall previous git version and reinstall new version of git, after that change SSH executable. Go through
AndroidStudio -> Preferences -> Git -> SSH Executable and changed from Native to Built-in
answered Apr 25, 2021 at 15:38
I’m trying to install git for android studio after installation it shows this type of error internal error: CallspawnServer: Uexpected respose: $0
even after i installed latest version of both android studio 4.1.3 and git 2.31.1
whenever i’m trying to open adroid studio it gives me notification of cannot run git, git is not installed
while using adroid studio it redirect me again and again to installation window of git.
guys please suggest me i’m working on important project.
asked Apr 24, 2021 at 19:14
Change the SSH executable to your own native one:
AndroidStudio -> Preferences -> Git -> SSH Executable and changed from Native to Built-in
answered Apr 25, 2021 at 2:05
I solved this problem by changing SSH executable and uninstall the previous git version and reinstall it and finally it works.
First of all you can uninstall previous git version and reinstall new version of git, after that change SSH executable. Go through
AndroidStudio -> Preferences -> Git -> SSH Executable and changed from Native to Built-in
answered Apr 25, 2021 at 15:38
Windows 10: Internal error: CallSpawnServer: Unexpected response: $0
Discus and support Internal error: CallSpawnServer: Unexpected response: $0 in Windows 10 BSOD Crashes and Debugging to solve the problem; Foxit PDF reader started to auto-close itself after a few seconds. So I uninstalled the application, reinstalled and got this error:
Internal error:…
Discussion in ‘Windows 10 BSOD Crashes and Debugging’ started by [_Patrick_], Jan 8, 2021.
-
Internal error: CallSpawnServer: Unexpected response: $0
Foxit PDF reader started to auto-close itself after a few seconds. So I uninstalled the application, reinstalled and got this error:
Internal error: CallSpawnServer: Unexpected response: $0
The program did install, but still auto-closes itself.
I uninstalled, installed Javelin PDF reader, got the same error at the end of the installation, and have the same problem after opening the application.
I’ve tried another .NET application, same issue. Non .NET applications don’t seem to be affected. After the last one I checked the Event Viewer and there’s nothing new.
I’ve tried one of my own .NET C# applications, and it also closes itself. MS Visual Studio closes itself as well.
-
Error message
Can someone explain this error message:
internal error: CallSpawnServer: Unexpected response: $0
I was installing an app called iVCam from e2eSoft
-
Unexpected Store Exception
Hi,
Many factors can be involved with the Unexpected Store Exception
blue screen error such as a conflict with some third-party software, a faulty RAM, or a hardware failure. To rectify such issue, we’d like to ask a few questions:- Were there any changes made on your computer settings prior to this issue?
- Does your computer have the most recent update for Windows 10?
Meanwhile, we suggest that you follow the series of steps in this
article which lists some troubleshooting instructions suitable for blue screen errors.We look forward to your response.
-
Internal error: CallSpawnServer: Unexpected response: $0
Unexpected Store Exception
Hi Peter,
The stop error «Unexpected Store Exception» that you encountered can be caused by a corrupted cache of the Windows Store, system files that got corrupted, a third-party anti-virus software causing a conflict or other system settings that may cause a conflict
to name a few. For us to resolve your concern, kindly answer the questions below:- What troubleshooting steps have you attempted and what were the results?
- What is the complete stop error that you saw when the blue screen error occurred? If possible, kindly post a screenshot.
- Were there any specific activities that trigger the blue screen with a stop code to appear?
- Have you already tried to temporarily disable the third party anti-virus software and check if that resolves the issue?
- Which version and build of Windows 10 is installed on your device?
As an initial recommendation, we suggest that you follow the steps on this
link to complete the guided walk-through to correct issues that may lead to a blue screen error with a stop code.We look forward to your response to our queries.
Thema:
Internal error: CallSpawnServer: Unexpected response: $0
-
Internal error: CallSpawnServer: Unexpected response: $0 — Similar Threads — Internal error CallSpawnServer
-
Unexpected error
in Windows 10 Software and Apps
Unexpected error: I reinstalled my audio driver because my new headphones is not working but it’s giving me an error saying plug and play is not avaialble. I restarted but nothing works.
https://answers.microsoft.com/en-us/windows/forum/all/unexpected-error/cf5d112f-b37e-46c6-980a-935a8ad0dec1
-
Unexpected error
in Windows 10 Drivers and Hardware
Unexpected error: I reinstalled my audio driver because my new headphones is not working but it’s giving me an error saying plug and play is not avaialble. I restarted but nothing works.
https://answers.microsoft.com/en-us/windows/forum/all/unexpected-error/cf5d112f-b37e-46c6-980a-935a8ad0dec1
-
Unexpected error
in Windows 10 Software and Apps
Unexpected error: I uninstalled my audio driver because my new headphones is not working. I reinstalled my driver but it’s giving me unexpected error saying plug and play is not available in the machine. I restarted many times but nothing works. Please help…
-
Internal HDD-0 is locked by a password?
in Windows 10 Installation and Upgrade
Internal HDD-0 is locked by a password?: So I plugged in my line in aux cable from my guitar amp into my laptop and it froze, the screen went black, but the backlight was on and I could still hear stuff in the background. So I decided to shutdown my computer by holding the power button fora set amount of time, I am…
-
UNEXPECTED ERROR
in Windows 10 Ask Insider
UNEXPECTED ERROR: [ATTACH] submitted by /u/Saokaaay
[link] [comments]UNEXPECTED ERROR from Windows10
-
Error: There is a problem with a device connected to your pc. An unexpected I/0 error has…
in Windows 10 BSOD Crashes and Debugging
Error: There is a problem with a device connected to your pc. An unexpected I/0 error has…: for two months my laptop screen has blue screen and on screen it was written that an autoatic repair needed,Then there are two options: 1restart the pc 2 press F8 for start -up settings. but after the restart there is same problem saying «There is a problem with a device…
-
Bootrec commands giving unexpected responses
in Windows 10 Installation and Upgrade
Bootrec commands giving unexpected responses: After a fresh install of Windows 10 on my Acer Swift, I tried running the command: bootrec /scanos.
This command however is showing 0 total Windows Installations. Windows boots and BIOS Settings appear normal. The computer can run updates and is currently up-to-date.
This…
-
Srttrial.txt 0×0 error
in Windows 10 Ask Insider
Srttrial.txt 0×0 error: When i go advanced settings and repair windows from loadind i get this error..and when i open the file it says hdd errors 0×0 long page..how i fix that?i tried to put every command in cmd doesnt help..and tried many youtube guides ..i thought the prob was on hdd so i bought…
-
Unexpected error
in Windows 10 BSOD Crashes and Debugging
Unexpected error: I get the above error message when I try to access a Dailywire news feed. Just started happening in the past couple of days.
https://answers.microsoft.com/en-us/windows/forum/all/unexpected-error/52dd6a5e-d31a-45ab-b94a-5b0cf62be230
Users found this page by searching for:
-
internal error queryspawnserver unexpected response $0
,
-
внуьтренняя error callspawnserver unexpected response $0
Recommended Posts
Hi. I was just updating to 2022.06 build 28 and at the end of the installation process I got this error message. I opened a project and it seems ok but want to check if the install went ok or not with this message coming up. At least it’s cheap at only $0. Thanks for any suggestions !
Share this post
Link to post
Share on other sites
TREESHA… you’re NOT the only one!!1
Many, too many of us have got that error ++ others that are appearing lately with Cakewalk SONAR by Bandlab.
(Maybe is the price to pay for «FREE» something that used to cost money… I for one, PAID FOR IT and now I’ve had to go back to Cubase, MOTU… )
The Customer support is only via email of course and is DREADFUL!!
Answers to problems to a Computer technician and Music & Technology MBA such as… Reboot the PC… Check your Firewall…
Pls, GET SONAR Platinum back and CHARGE for it so we can complain and get answers.
Bandlab… You have made a complete MESS of a decent program with EXCELLENT Client Support.
-
2
Share this post
Link to post
Share on other sites
9 hours ago, tam said:
TREESHA… you’re NOT the only one!!1
Many, too many of us have got that error ++ others that are appearing lately with Cakewalk SONAR by Bandlab.
(Maybe is the price to pay for «FREE» something that used to cost money… I for one, PAID FOR IT and now I’ve had to go back to Cubase, MOTU… )
The Customer support is only via email of course and is DREADFUL!!
Answers to problems to a Computer technician and Music & Technology MBA such as… Reboot the PC… Check your Firewall…Pls, GET SONAR Platinum back and CHARGE for it so we can complain and get answers.
Bandlab… You have made a complete MESS of a decent program with EXCELLENT Client Support.
…….. and you have of course done something as simple as reading the other thread called :
Cakewalk Activation Error (20)
you being in IT and having an MBA ? That might help you plus you should dial down the anger a little.
All the best,
J
Edited July 10, 2022 by Jeremy Oakes
Share this post
Link to post
Share on other sites
3 hours ago, Jeremy Oakes said:
. . . Cakewalk Activation Error (20) . . .
I haven’t gotten this error myself (possibly because I don’t seem to use plug-ins that remove files Cakewalk needs), but thanks for mentioning the other thread in case I do run into this situation. I often tend to forget posts that I have no experience with.
Even though tam’s diatribe was overwhelmingly way too over the top for me, I suppose tam merits credit for an assist here.
Peace!
Share this post
Link to post
Share on other sites
I haven’t received any feedback on my specific internal error message so I rolled back and all is well. I haven’t tried updating again but will at some point.
Edited July 10, 2022 by treesha
Share this post
Link to post
Share on other sites
You can Update now if you wish…
They solved the issue in the update, (after almost TWO months!!)
-
1
Share this post
Link to post
Share on other sites
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now
Я пытаюсь установить git для студии Android после установки, он показывает этот тип ошибки внутренняя ошибка: CallspawnServer: Uexpected respose: $ 0 даже после того, как я установил последнюю версию как android studio 4.1.3, так и git 2.31.1 всякий раз, когда я пытаюсь открыть студию adroid, я получаю уведомление о том, что невозможно запустить git, git не установлен
При использовании студии Android он снова и снова перенаправляет меня в окно установки git.
Ребята, пожалуйста, предложите мне, что я работаю над важным проектом.
2 ответа
Лучший ответ
Измените исполняемый файл SSH на свой собственный:
Android Studio -> Настройки -> Git -> Исполняемый файл SSH и изменен с собственного на встроенный
0
MrFthiz
25 Апр 2021 в 02:05
Я решил эту проблему, изменив исполняемый файл SSH, удалил предыдущую версию git и переустановил ее, и, наконец, она заработала.
Прежде всего, вы можете удалить предыдущую версию git и переустановить новую версию git, после чего изменить исполняемый файл SSH. Пройдите через AndroidStudio -> Настройки -> Git -> Исполняемый файл SSH и измените его с собственного на встроенный.
0
pradyumna
25 Апр 2021 в 15:38
Details
-
Type:
Question
-
Status:
Resolved -
Priority:
Major
-
Resolution:
Cannot Reproduce
-
Environment:
Windows 10 64-bit
Question
MajorDescription
I was recently prompted to install the latest version of Greenshot, but I am unable to complete the Install; it crashes and gives me the following error message
«Internal error: CallSpawnServer: Unexpected Response: $0»
I am not a programmer and have no idea what that means, but would appreciate any assistance in how I can resolve it and complete an Install.
Gliffy Diagrams
Activity
|
Zardoz2293
Advanced user
|
At the end of the installation, received the following error:
Sincerely, |
||
|
|
|||
|
Alex Fadeyev
Администратор
|
|
||
|
|
|||
|
Zardoz2293
Advanced user
|
It occurred once at the end of the installation process. I don’t know if there was some processing still to continue or not. I’ll perform an install again (or repair which ever will occur and report the results). However, Is there an installation log I can provide to you? I don’t want to re-install if there is an installation log and it would be overwritten. I’ll wait until your reply. Sincerely, |
||
|
|
|||
|
Zardoz2293
Advanced user
|
I’ll see what happens in the next update/install and report back. Sincerely, |
||
|
|
|||
- Forum
- Medieval II: Total War
- Medieval II: Total War
- M2TW: Kingdoms Hosted Modifications
- Rusichi Total War
- umm, bit of a problem………..
-
April 05, 2009, 07:58 PM
#1
umm, bit of a problem………..
after i installed this mod, i clicked finish, with launch ticked. but instead of launching the game, i got an error, and a pretty wierd one too
this is the error= Internal error:CallSpawnServer: Unexpected Response: $0.
if anyone could help i would be REALLY greatful,……….like….a million rep a day kind of greatful, IF ya get my meaning
ok, i tried something different and now i got this error =unable to execute file C:programfilesSEGAMedieval II Toal Warmodskingdoms.exe
CreateProcess failed; code 2
system cannot find the file specifiedi know someone else posted this same error problem, but i dont understand the explanation and i dont think it was even answereed anyway!
Last edited by IrishBlood; April 05, 2009 at 08:31 PM.
-
April 06, 2009, 08:35 AM
#2
Laetus
Re: umm, bit of a problem………..
Is it first start of Rusichi?
Please open folder M2TWmodsRusichi_TW/ and delete folders
1) preferences
2) packs
Then in modsRusichi_TWdatatext delete all .strings.bin files except
strat.txt.strings.bin
tooltips.txt.strings.bin
shared.txt.strings.bin
battle_ed.txt.strings.bin
Then try to run rusichi again.
-
April 06, 2009, 03:45 PM
#3
Re: umm, bit of a problem………..
Originally Posted by Svarogych
Is it first start of Rusichi?
Please open folder M2TWmodsRusichi_TW/ and delete folders
1) preferences
2) packs
Then in modsRusichi_TWdatatext delete all .strings.bin files except
strat.txt.strings.bin
tooltips.txt.strings.bin
shared.txt.strings.bin
battle_ed.txt.strings.bin
Then try to run rusichi again.its ok, i fixed it esterday, but i forgot to edit my post to say so, thanks for helping all the same though!
(thats plus one rep for you!
)
umm, bit of a problem………..
Originally Posted by Svarogych
)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
- BB code is On
- Smilies are On
- [IMG] code is On
- [VIDEO] code is On
- HTML code is Off
Forum Rules
|
Zardoz2293 |
At the end of the installation, received the following error:
Sincerely, |
||
|
|
|||
|
Alex Fadeyev |
|
||
|
|
|||
|
Zardoz2293 |
It occurred once at the end of the installation process. I don’t know if there was some processing still to continue or not. I’ll perform an install again (or repair which ever will occur and report the results). However, Is there an installation log I can provide to you? I don’t want to re-install if there is an installation log and it would be overwritten. I’ll wait until your reply. Sincerely, |
||
|
|
|||
|
Zardoz2293 |
I’ll see what happens in the next update/install and report back. Sincerely, |
||
|
|
|||