Before you do anything else, you’ll want to completely uninstall the driver. Go to the Apps page of your Settings and wait a minute or so for the list of installed apps to be populated, then scroll down until you see the Yamaha driver listed, click on it, and select uninstall. (I’m not in front of my Windows computer right now so I’m going by memory. If you have trouble finding it, I’ll look on my computer so I can give more specific detailed instructions.)
Are you sure it’s a DGX-600, or did you mean to type DGX-660? There’s no DGX-600 listed on Yamaha’s web site. It doesn’t matter as far as which version of the driver to use, but I wanted to check whether it has MIDI DIN ports or only a USB TO HOST port.
If it’s actually a DGX-660, you might not even need to use a driver with it, because it should be class compliant. What software are you trying to use with it? Does it show up as an available MIDI device even without installing a driver? (It will most likely be listed as “Digital Keyboard,” “Digital Piano,” or something like that, rather than as the specific model number.) If it does show up, you don’t need to worry about installing the driver— although you can still install it if you wish.
Even if the keyboard doesn’t show up as an available MIDI device with no driver installed, it should at least show up in your Windows system (under Devices) as an unknown USB device. If it isn’t showing up at all, then the next step is to verify that you’re using the correct type of USB connection.
You MUST use a USB 2 cable, NOT a USB 3 cable. I think you can tell them apart based on the color inside the connector— I think USB 3 cables and ports usually have blue parts inside their connectors. (If you aren’t sure what to look for, search for “how to identify usb 3.”) It is probably also best to plug the USB 2 cable into a USB 2 port, rather than into a USB 3 port— but if your computer doesn’t have a USB 2 port, then at least be certain to use a USB 2 cable. If it turns out that you’ve been trying to use a USB 3 cable, then that’s most likely the problem right there, and switching to a USB 2 cable may resolve the connection issue.
By the way, you also want to make sure you’re using a good USB cable, because the wires inside of a cable can get broken, especially if you’ve been winding and unwinding the cable a lot when putting it away and getting it back out. Try using the cable with some other device to verify that it’s working properly.
If you do need or want to install the Yamaha USB-MIDI driver, then first make sure you’ve uninstalled the failed installation. Furthermore, before you try to reinstall the driver you must make sure the keyboard is connected to your computer, is turned on, and is detected as a USB device.
The version of the driver that you choose— 32 or 64 bits— must match your operating system, so if you have a 64-bit OS then you must use the 64-bit driver.
You want to use the newest version for Windows 10, since that’s the version of Windows you have. (An older Windows 10 version might also work, but the newest version is always best in case there were any fixes that might have an impact.)
Install the driver while the keyboard is connected and turned on, and the driver should be able to find it.
If these suggestions don’t help, please let us know so we can take it from there.
— Firmware update doesn’t start or doesn’t complete
● Receiver doesn’t power up after the update.
● Error message appeared when confirming the firmware version.
Recovery method using USB method:
1. Unplug the AC power cable from wall outlet.
2. Insert the USB thumb drive which has the firmware data stored inside, into the USB port located on the front panel.
3. Press and hold the PURE DIRECT key and keep it pressed while you plug the AC power cable back into the wall outlet again.
“ USB UPDATE ” will appear on the front display. Then, release the PURE DIRECT key.
4. The update will start automatically.
5. When “ UPDATE SUCCESS ” appears on the display, firmware update is completed.
Power off the receiver and remove the USB thumb drive.
6. Confirm updated firmware version.
— Error message appeared during the update
Cause: For some reason, the receiver can’t read the firmware data.
Method: For your solution, check the following
[Update through Internet]
❏ Check Internet connection.
Check if the Internet connection is working by playing an Internet radio station.
(See owner’s manual for details)
[Update by USB thumb drive]
❏ USB thumb drive is connected properly to the receiver.
❏ USB thumb drive is not password protected.
(AV receiver cannot read data from a security protected USB thumb drive)
❏ Make sure the USB thumb drive is inserted before the receiver is powered on for the update.
❏ The firmware data is stored in the root directory of the USB thumb drive.
❏ There is no other data except the firmware data in the USB thumb drive.
❏ No folders are created in the USB thumb drive.
Else, retry the update by USB using another USB thumb drive.
ATTENTION
PLEASE READ THIS SOFTWARE LICENSE AGREEMENT («AGREEMENT») CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. THIS AGREEMENT IS BETWEEN YOU (AS AN INDIVIDUAL OR LEGAL ENTITY) AND YAMAHA CORPORATION («YAMAHA»).
BY DOWNLOADING OR INSTALLING THIS SOFTWARE OR OTHERWISE RENDERING IT AVAILABLE FOR YOUR USE, YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS LICENSE. IF YOU DO NOT AGREE WITH THE TERMS, DO NOT DOWNLOAD, INSTALL, COPY, OR OTHERWISE USE THIS SOFTWARE. IF YOU HAVE DOWNLOADED OR INSTALLED THE SOFTWARE AND DO NOT AGREE TO THE TERMS, PROMPTLY DELETE THE SOFTWARE.
GRANT OF LICENSE AND COPYRIGHT
Yamaha hereby grants you the right to use the programs and data files composing the software accompanying this Agreement, and any programs and files for upgrading such software that may be distributed to you in the future with terms and conditions attached (collectively, “SOFTWARE”), only on a computer, musical instrument or equipment item that you yourself own or manage. While ownership of the storage media in which the SOFTWARE is stored rests with you, the SOFTWARE itself is owned by Yamaha and/or Yamaha’s licensor(s), and is protected by relevant copyright laws and all applicable treaty provisions.
RESTRICTIONS
- You may not engage in reverse engineering, disassembly, decompilation or otherwise deriving a source code form of the SOFTWARE by any method whatsoever.
- You may not reproduce, modify, change, rent, lease, or distribute the SOFTWARE in whole or in part, or create derivative works of the SOFTWARE.
- You may not electronically transmit the SOFTWARE from one computer to another or share the SOFTWARE in a network with other computers.
- You may not use the SOFTWARE to distribute illegal data or data that violates public policy.
- You may not initiate services based on the use of the SOFTWARE without permission by Yamaha Corporation.
Copyrighted data, including but not limited to MIDI data for songs, obtained by means of the SOFTWARE, are subject to the following restrictions which you must observe.
- Data received by means of the SOFTWARE may not be used for any commercial purposes without permission of the copyright owner.
- Data received by means of the SOFTWARE may not be duplicated, transferred, or distributed, or played back or performed for listeners in public without permission of the copyright owner.
- The encryption of data received by means of the SOFTWARE may not be removed nor may the electronic watermark be modified without permission of the copyright owner.
TERMINATION
If any copyright law or provisions of this Agreement is violated, the Agreement shall terminate automatically and immediately without notice from Yamaha. Upon such termination, you must immediately destroy the licensed SOFTWARE, any accompanying written documents and all copies thereof.
DOWNLOADED SOFTWARE
If you believe that the downloading process was faulty, you may contact Yamaha, and Yamaha shall permit you to re-download the SOFTWARE, provided that you first destroy any copies or partial copies of the SOFTWARE that you obtained through your previous download attempt. This permission to re-download shall not limit in any manner the disclaimer of warranty set forth in Section 5 below.
DISCLAIMER OF WARRANTY ON SOFTWARE
You expressly acknowledge and agree that use of the SOFTWARE is at your sole risk. The SOFTWARE and related documentation are provided «AS IS» and without warranty of any kind. NOTWITHSTANDING ANY OTHER PROVISION OF THIS AGREEMENT, YAMAHA EXPRESSLY DISCLAIMS ALL WARRANTIES AS TO THE SOFTWARE, EXPRESS, AND IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SPECIFICALLY, BUT WITHOUT LIMITING THE FOREGOING, YAMAHA DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE CORRECTED.
LIMITATION OF LIABILITY
YAMAHA’S ENTIRE OBLIGATION HEREUNDER SHALL BE TO PERMIT USE OF THE SOFTWARE UNDER THE TERMS HEREOF. IN NO EVENT SHALL YAMAHA BE LIABLE TO YOU OR ANY OTHER PERSON FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EXPENSES, LOST PROFITS, LOST DATA OR OTHER DAMAGES ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THE SOFTWARE, EVEN IF YAMAHA OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. In no event shall Yamaha’s total liability to you for all damages, losses and causes of action (whether in contract, tort or otherwise) exceed the amount paid for the SOFTWARE.
THIRD PARTY SOFTWARE
Third party software and data («THIRD PARTY SOFTWARE») may be attached to the SOFTWARE. If, in the written materials or the electronic data accompanying the Software, Yamaha identifies any software and data as THIRD PARTY SOFTWARE, you acknowledge and agree that you must abide by the provisions of any Agreement provided with the THIRD PARTY SOFTWARE and that the party providing the THIRD PARTY SOFTWARE is responsible for any warranty or liability related to or arising from the THIRD PARTY SOFTWARE. Yamaha is not responsible in any way for the THIRD PARTY SOFTWARE or your use thereof.
- Yamaha provides no express warranties as to the THIRD PARTY SOFTWARE. IN ADDITION, YAMAHA EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, as to the THIRD PARTY SOFTWARE.
- Yamaha shall not provide you with any service or maintenance as to the THIRD PARTY SOFTWARE.
- Yamaha is not liable to you or any other person for any damages, including, without limitation, any direct, indirect, incidental or consequential damages, expenses, lost profits, lost data or other damages arising out of the use, misuse or inability to use the THIRD PARTY SOFTWARE.
U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE:
The Software is a «commercial item,» as that term is defined at 48 C.F.R. 2.101 (Oct 1995), consisting of «commercial computer software» and «commercial computer software documentation,» as such terms are used in 48 C.F.R. 12.212 (Sept 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.72024 (June 1995), all U.S. Government End Users shall acquire the Software with only those rights set forth herein
GENERAL
This Agreement shall be interpreted according to and governed by Japanese law without reference to principles of conflict of laws. Any dispute or procedure shall be heard before the Tokyo District Court in Japan. If for any reason a court of competent jurisdiction finds any portion of this Agreement to be unenforceable, the remainder of this Agreement shall continue in full force and effect.
COMPLETE AGREEMENT
This Agreement constitutes the entire agreement between the parties with respect to use of the SOFTWARE and any accompanying written materials and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding the subject matter of this Agreement. No amendment or revision of this Agreement will be binding unless in writing and signed by a fully authorized representative of Yamaha.
- Главная
- Yamaha
- Yamaha RX-V471
У аудио ресиверов Yamaha есть система защиты в случае системных ошибок. Например если подключить к USB порту неисправную USB-флеш или иное устройство, то ресивер выключится, при этом записав во внутреннюю память ошибку. И после такой ошибки ресивер не будет подавать никаких признаков жизни, при этом в плане железа остается абсолютно исправным. RX-V471 не является исключением. Для сброса такого рода ошибок выполните следующее:
-
Выключите ресивер из розетки
-
Зажмите кнопки «TONE CONTROL» и «INFO»
-
Затем подключите ресивер к сети
-
И затем нажмите кнопку «Power» и удерживайте все 3 кнопки не менее 3-х секунд
После данной операции ресивер выполнит очистку памяти системы защиты, и при условии исправности остального железа должен запуститься. В противном случае вам придется обратиться в сервисный центр.
Комментарии
Комментариев нет
Если вам помог какой-то совет или наоборот не помог, то не поленитесь — зарегистрируйтесь и проголосуйте. Тем самым вы поможете другим пользователям и нам. Ну или просто кликните на рекламе, это нас тоже порадует и таким образом вы можете нас отблагодарить. Так же, только зарегистрированные пользователи могут оставлять комментарии и вносить изменения в базу.
Зарегистрировавшись вы сможете добавлять новые устройства или добавлять заметки к уже существующим.
Зарегистрироваться или войти вы можете на этой странице